USED - This guitar is in mint unplayed condition, it includes its original case, and all the original case candy. The 1958 Les Paul Standard Reissue from Gibson’s Custom Shop presents the most accurate recreation yet available of this first incarnation of the hallowed “Burst”, in a guitar that contains all the crucial ingredients, with a less showy maple top that is sometimes considered more authentic looking than those with highly detailed figuring.
The 1958 Les Paul Standard Reissue relies on the ingredients that made the Les Paul a classic in the first place, but puts them together in the way that first began to show off what was going on underneath the finish. The Gibson Custom Shop uses a body of solid, non-weight relieved mahogany, which blends depth and richness with the snap and clarity of the maple top.
SOLD!
SPECS
Features
- Wight: 8.14 lbs.
- One-piece rosewood fingerboards
- Aniline Dye
- Kluson Deluxe machine heads
- Hot Hide Glue Neck Fit
- Custom Buckers
- Historic Truss Rod Assembly (no tubing)
- Accurate body and fingerboard binding color
Body
- Top: Carved Maple Top
- Back: Solid, Non-Weight Relieved Mahogany Back
- Binding: Single-ply Cream Binding on Top
- Adhesive: Franklin Titebond
Neck
- Species: 1-piece Mahogany Neck with Long Neck Tenon
- Profile: Early ’50s Rounded
- Truss Rod: Historic Truss Rod Assembly (No Tubing)
- Joint Angle: 4 degrees (+/- 15 seconds)
Neck Fit
- Joint: Mortise and Tenon
- Adhesive: Hot Hide Glue
- Joint Angle Tolerance: +/- .005 inch
Fingerboard
- Species: One-piece Rosewood
- Radius: 12 inches
- Scale Length: 24.75 inches
- Binding: Single-ply Cream
- Inlays: Cellulose Trapezoid
- Nut/E.O.B: 1.687/2.062
Nut
- Material: Nylon
- Width: 1.687
- Slots: Gibson PLEK System
Headstock
- Inlay: Holly Headstock Veneer w/ Pearl logo
- Truss Rod Cover: Vintage Black and White
- Angle: 17 Degrees
Tuners
- Model: Kluson Deluxe
- Tuning Ratio: 12:01
- Plating: Nickel
Bridge
- Type: ABR-1 bridge
- Plating: Nickel
- Tailpiece Type: Lightweight Aluminum Stopbar Tailpiece
- Plating: Nickel
Hardware
- Knobs: Gold Top Hats with Dial Pointers
- Toggle Switch Washer: Cream with Gold Silkscreen
- Pickguard: Cream
- Pickup Mounting Rings: Cream
- Control Plate Cover: Black
- Strings: .010 – .046
- Strap Buttons: Aluminum
Pickups
- Neck Position: Custom Bucker
- Bridge Position: Custom Bucker
Electronics
- Potentiometers: 2 Volume Controls, 2 Tone Controls
- Capacitors: Bumblebee
- Toggle Switch: Three-Way with Amber Toggle Cap
- Output Jack: Traditional 1/4 inch
- Finish Sealer: Nitrocellulose Lacquer
- Case: Custom Shop Hardshell
GALLERY